Tweet
I have a AC-30 Culligan RO system. I replaced all the filters today, but I'm now concerned about the flushing procedures especially with the membrane filter.
The instructions (which I read to late) says a minimum 6 hour flush must be done to remove preservation solution. I hope I didn't contaminate all the filters since I have run water through the system.
Any suggestions, can I just keep flushing?
The instructions (which I read to late) says a minimum 6 hour flush must be done to remove preservation solution. I hope I didn't contaminate all the filters since I have run water through the system.
Any suggestions, can I just keep flushing?